Post-coating treatment spray to enhance non-stick and release properties.

1. Autobody repairs.
 

-Designed for excellent adhesive properties.
-Can be built up to very thick deposits for auto body repair
-After spraying, the deposit can be sanded and polished in preparation for painting.
 

1. Ship board hulls resisting abrasive cargo.
2. Waste containers, garbage bins.
3. Thick bulletproof composites.
 

The multiplex technology in Xiom 253 powders is unique to the powder coating industry. Specially formulated for Thermal Spraying this hybrid powder is designed to achieve high deposit efficiency, very strong substrate adhesion without primers and synergistic interparticle cohesion providing covalent bonding, easy wetting and flow thus forming continuous impermeable coatings.

*A range of colors is available.

1. Diaper and sanitary napkin rolls.
2. Adhesive tape components.
3. Paper rolls.
4. Label components.
5. Release components for rubber manufacturing.
 

1. Diaper and sanitary napkin rolls.
2. Adhesive tape components.
3. Paper rolls.
4. Label components.
5. Release components for rubber manufacturing.
 

1. Diaper and sanitary napkin rolls.
2. Adhesive tape components.
3. Paper rolls.
4. Label components.
5. Release components for rubber manufacturing.
 

1. Decorative coatings for steel, concrete, masonry walls, fiberglass and wood.
2. Corrosion protection for exposed interior steel beams.
 

The multiplex technology in Xiomtek 400 is patent pending and unique to the powder coating industry. Specially formulated for thermal spraying, this hybrid powder is designed to achieve high deposit efficiency, very strong substrate adhesion plus easy wetting and flow, thus forming continuous impermeable smooth coatings.

XIOMTEK 400 powders are designed as one step architectural coatings for application to most substrates with out the need for bond coats or primers. It is easy to spray and forgiving of most thermal spray problems. The coatings have excellent bonding attributes and no edge pull back, ideal for interior applications or shielded exterior applications. For long term exterior exposure Xiom recommends XT 600 series coatings.
 

*A range of colors is available.

1. Water pipes, couplings and fittings. Non- Potable water
2. Waste containers, garbage bins.
3. Office equipment, counter tops, furniture.
4. Walls, wallboard, floors, concrete, siding, roofing, glazing for cement tile.
5. Heating, Ventilation, and Air conditioning equipment (including, insulation, ducts, heat exchangers, drain pans and parts thereof.)
6. Spas, bathtubs, showers and filters.
7. Decorative coating for wood, tile, and masonry components.
8. Refinish ceramic tiles in private and public toilets.
9. Refinish ceramic tiles and masonry on commercial structures such as tunnels and subways etc.

HA 401-00 is patent pending and unique to the powder coating industry. Specially formulated for thermal spraying, this hybrid powder is designed to achieve high deposit efficiency, very strong substrate adhesion plus easy wetting and flow, thus forming crystal clear continuous impermeable coatings on most surfaces. The coating should be applied in one pass to insure proper thin coating is achieved. The AgION Silver antimicrobial additive inhibits the growth of mold, mildew, fungus and bacteria that cause odor, discoloration, staining, deterioration or corrosion on the surface of the coating film. Fluoropolymers enhance surface characteristics.
 

1. Glow in the dark coatings on steel, concrete, masonry walls, fiberglass and wood for both interior and exterior applications.

XIOMTEK 490 is designed for one step application to most substrates with out the need for bond coats or primers. It is easy to spray and forgiving of most thermal spray problems. The coatings have excellent bonding attributes and no edge pull back.
 

1. Boat hulls.
2. Buoys.
3. Piers and docks.
 

XIOM 503 Thermal spray coatings are highly durable and will not chalk or discolor.

1. Water pipes, couplings and fittings. Non- Potable water.
2. Highway and Bridge components.
3. Corrosion protection for iron and steel.
4. Radiation shielding.
5. Marine hardware.
 

*A range of colors is available.

1. Water pipes, couplings and fittings. Non- Potable water.
2. Highway and Bridge components.
3. Corrosion protection for iron and steel.
4. Radiation shielding.
5. Marine hardware.
6. Electric insulation.
 

*A range of colors is available.

1. Potable water components including, water pipes, couplings and fittings, water storage vessels.
2. Food collection, conveyance and storage equipment including belts, silos, tanks, process vessels.
3. Appliances and food processing equipment, including formers, washers, freezes, shelving, grinders, countertops and choppers.
4. Beverage and ice machine equipment, including mixers, pumps, bottlers, canners, dispensers and other components.
5. Food and chemical transportation equipment, including railcars, tankers, trailers and components thereof.
6. Building materials exposed to food products.
 

*A range of colors is available. See color charts, however only some colors are approved for food contact.
 

1. Water pipes, couplings and fittings. Non- Potable water.
2. Waste containers, garbage bins.
3. Office equipment, counter tops, furniture.
4. Walls, wallboard, floors, concrete, siding, roofing, glazing for cement tile.
5. Heating, ventilation, and air conditioning equipment (including, insulation, ducts, heat exchangers, drain pans and parts thereof).
6. Spas, bathtubs, showers and filters.
 

*A range of colors is available.

1. Masonry walls.
2. Steel structures.
 

The multiplex technology in Xiom 525 is unique to the powder coating industry. Specially formulated for Thermal Spraying, this hybrid powder is designed to achieve high deposit efficiency, very strong substrate adhesion and synergistic interparticle cohesion, providing covalent bonding, easy wetting and flow, thus forming continuous impermeable coatings. The FEP additive contributes non-stick properties and the secondary siloxane treatment makes the surface resistant to graffiti.
 

*A range of colors is available.

1. Decorative coatings for steel, concrete, masonry walls, fiberglass and wood.
 

A patent pending Thermal Spray powder comprising modified nylon and Thermoset resins. This coating is multi phase and bonds readily to most surfaces, including steel, aluminum, fiberglass, masonry and wood by griping deep into surface imperfections as it flows and wets to form smooth and continuous films. Useful as a one step coating applied directly to the substrate for both interior and long term exterior exposure. No liquid primer or bond coat required except on steel substrates used for exterior applications, which then calls for XT 725 zinc rich bond coat.
 

*A range of colors is available. Click a color chart below to see examples.

COLOR CHART#1 , COLOR CHART#2

1. Water pipes, couplings and fittings. Non-potable water.
2. Waste containers, garbage bins.
3. Office equipment, counter tops, furniture.
4. Walls, wallboard, floors, concrete, siding, roofing, glazing for cement tile.
5. Heating, ventilation, and air conditioning equipment (including, insulation, ducts, heat exchangers, drain pans and parts thereof).
6. Spas, bathtubs, showers and filters.
7. Decorative coatings for steel, concrete, masonry walls, fiberglass and wood .

The multiplex technology in Xiomtek 601-00-00 is patent pending and unique to the powder coating industry. Specially formulated for thermal spraying, this hybrid powder is designed to achieve high deposit efficiency, very strong substrate adhesion plus easy wetting and flow, thus forming continuous impermeable smooth coatings with anti microbial properties. The AgION Silver antimicrobial additive inhibits growth of mold, mildew, fungus and bacteria that cause odor, discoloration, staining, deterioration or corrosion on the surface of the coating film.

*A range of colors is available.

1. Waste containers, garbage bins
2. Masonry, bricks and cinder block.
3. Walls, wallboard, floors, concrete, siding, roofing, glazing for cement tile.
4. Steel structures, fiberglass and wood.
 

A patent pending Thermal Spray co- polymer powder comprising modified nylon and polyester resin plus fluoropolymers for anti graffiti resistance. This coating is multi phase, it bonds readily to most surfaces, including steel, aluminum, fiberglass, masonry and wood by gripping deep into surface imperfections as it flows and wets to form smooth and continuous films. Useful as a one step coating with anti graffiti properties. It can be applied directly to substrates for both interior and exterior applications. No liquid primer or bond coat required. On steel consider using XT 725 zinc bond coat to prevent rusting.
Specially designed for thermal spraying. Xiomtek 615-00-00 powder over comes many of the bonding problems normally encountered when thermal spraying generic plastic powders.

 

*A range of colors is available.

1. Water pipes, couplings and fittings. Non- Potable water.
2. Waste containers, garbage bins.
3. Office equipment, counter tops, furniture.
4. Walls, wallboard, floors, concrete, siding, roofing, glazing for cement tile.
5. Heating, ventilation, and air conditioning equipment (including, insulation, ducts, heat exchangers, drain pans and parts thereof).
6. Spas, bathtubs, showers and filters.
7. Decorative coating for wood, tile, and masonry components.
8. Refinish ceramic tiles in private and public toilets.
9. Refinish ceramic tiles and masonry on commercial structures such as tunnels and subways etc.
 

Xiomtek 661-03-08 is patent pending and unique to the powder coating industry. Specially formulated for thermal spraying, this hybrid powder is designed to achieve high deposit efficiency, very strong substrate adhesion plus easy wetting and flow, thus forming continuous impermeable coatings on most surfaces. This coating is not recommended for outside exposure. It is not technique dependent and tests show that coatings adhere to surfaces with out preheating and with little to no surface roughening. While this quality is remarkable and a good sign of technique independence, surface preparation is still recommended for insurance against processing errors. The AgION Silver antimicrobial additive inhibits the growth of mold, mildew, fungus and bacteria that cause odor, discoloration, staining, deterioration or corrosion on the surface of the coating film.

1. Bond coating and zinc rich primer for steel substrates before applying functioning topcoats from the XT 600 series.
2. Applicable to both interior and exterior structures.
 

Xiomtek 725 is patent pending and unique to the powder coating industry. Specially formulated for thermal spraying, this patent pending powder is designed to deliver zinc metal to steel substrates in a bond coating with very high deposit efficiency and very strong substrate adhesion plus easy wetting and flow, thus forming continuous impermeable coatings. The epoxy / co-polyamide constituents in the bond coat makes its surface ideal for bonding to functioning top coats from the XT 600 series powder coatings.
Top coatings can be applied immediately after the bond coat is down or may be delayed as long as required.
 

1. Bond coating for most surfaces before applying Xiom 525 anti graffiti coating.
2 . Bond coating for all surfaces before applying Xiom 503 anti fouling applications.
3. Bond coating for all surfaces before applying Xiom 520, Xiom 517.

Xiomtek 750-03-09 is patent pending and unique to the powder coating industry. Specially formulated for thermal spraying, this hybrid powder is designed to achieve high deposit efficiency, very strong substrate adhesion plus easy wetting and flow, thus forming continuous impermeable coatings on most surfaces. The epoxy constituent in the bond coat makes its surface ideal for bonding to functioning top coats.
Top coatings can be applied immediately after the bond coat is down or may be delayed as long as 48 hours or longer.
 

1. Bond coating and zinc rich primer for steel substrates before applying functioning top coats from the XT 500 series.
2. Applicable to both interior and exterior structures
3. Bond coating and zinc rich primer for steel substrates before applying Xiom 525 anti graffiti coating .
4. Bond coating and zinc rich primer for steel substrates before applying Xiom 503 for anti fouling applications.
5. Bond coating and zinc rich primer for steel substrates before applying Xiom 520, Xiom 517
 

Xiomtek 765 is patent pending and unique to the powder coating industry. Specially formulated for thermal spraying, this patent pending powder is designed to deliver zinc metal to steel substrates in a bond coating with very high deposit efficiency and very strong substrate adhesion plus easy wetting and flow, thus forming continuous impermeable coatings. The epoxy / co-polyamide/ polyether constituents in the bond coat make its surface ideal for bonding to functioning top coats from the XT 500 series powder coatings.
Top coatings can be applied immediately after the bond coat is down or may be delayed as long as required.